Digital wall thickness testers ULTRA active in box with Pulse-Echo and Echo-Echo mode (dual), incl. meas. head 3 ... 300 / 0,7..600 / 0,01mm

• Protection class IP54
• TFT display 320x240 with adjustable brightness, for optimized readability in all conditions
• mm / inch commutation
• Test head with 1m cable
• Accuracy: +/-0.4% of the measured value
• Maximum coating thickness 3mm; paints, lacquers or similar coatings which shall be eliminated
• Dual measuring modes to determine material thickness: Pulse Echo mode up to 600mm and Echo Echo mode up to 100mm
• Range of sound velocity 100 to 19999 m/s
• Frequency range 5MHz, test head Ø 10mm
• Auto off
• Upper and lower limit alarm adjustable (acoustic and optical signal)
• 3 measurig modes: single measurement (standard), scan (ACTUAL, MIN and MAX value) and DIFF (difference between the ACTUAL measured value and a manually defined nominal thickness)
• Data output with USB interface

Delivered in case incl. probe, zero standard and batteries

Advantages of echo echo measurements:

• Determing the acutal thickness of materials regardless of any existing coating, such as, for example, paint or an anti-corrosion coating on the base metal. In this way, the wall thickness of pipes, for example, can be determined in a non-destructive manner, without having to remove the coating and the measurement can be shown on the display, with the adjustment for the coating thickness already taken into account.